tcn www.vishay.com vishay techno revision: 14-jan-13 1 document number: 68003 for technical questions, contact: te1resistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thick film capacitor networks, single-in-line, conformal coated sip features ? isolated and bussed schematics available ? np0 or x7r capacitors for line terminator ? wide operating temperature range (- 55 c to 125 c) ? epoxy based conformal coating ? solder coated copper terminals ? solderability per mi l-std-202 method 208e ? marking resistance to solv ents per mil-std-202 method 215 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 note ? * lead (pb)-containing terminations are not rohs-compliant. ? exemptions may apply. notes (1) np0 capacitors may be substi tuted for x7r capacitors. (2) tighter tolerances available on request. note ? for additional information on packaging, refer to the through-hole network packaging document ( www.vishay.com/doc?31542 ). standard electrical specifications model schematic capacitance range capacitance tolerance (2) % capacitance voltage v dc np0 (1) x7r tcn 01 33 pf to 3900 pf 470 pf to 0.1 f 10, 20 50 02 33 pf to 3900 pf 470 pf to 0.1 f 10, 20 50 09 33 pf to 3900 pf 470 pf to 0.1 f 10, 20 50 global part number information new global part number ing: tcn0801n101ktb (prefe rred part number format) global model pin count schematic characteristics capacitance value tolerance terminal finish packaging tcn 06 to 12 pin available 06 = 6 pin 08 = 8 pin 12 = 12 pin 01 02 09 n = np0 x = x7r (in picofarads) 2 digit significant figure, followed by a multiplier 101 = 100 pf 392 = 3000 pf 104 = 0.1 f k = 10 % m = 20 % t = sn90/pb10 c = sn95.5/ ag3.9/ cu0.6 b = bulk historical part numbering: tcn0801101ks 10 (will continue to be accepted) tcn 08 01 101 k s10 historical model pin count schematic capacitance value tolerance terminal finish 0801 10 n cn 1ktb t
tcn www.vishay.com vishay techno revision: 14-jan-13 2 document number: 68003 for technical questions, contact: te1resistors@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? custom schematics available. schematics schematic 01 schema tic 02 schematic 09 dimensions in inches (millimeters) number of pins a (max.) b 0.005 (0.127) c (max.) 6 0.590 (14.99) 0.500 (12.70) 0.350 (8.89) 7 0.690 (17.53) 0.600 (15.24) 0.350 (8.89) 8 0.790 (20.07) 0.700 (17.78) 0.350 (8.89) 9 0.890 (22.61) 0.800 (20.32) 0.350 (8.89) 10 0.990 (25.15) 0.900 (22.86) 0.350 (8.89) 11 1.09 (27.69) 1.00 (25.40) 0.350 (8.89) 12 1.19 (30.23) 1.10 (27.94) 0.350 (8.89) n n-1 4 3 2 1 ccc c c n n-1 4 3 2 1 cc c 1n n-1 4 3 2 ccc c 0.130 (3.30) max. 0.010 0.002 (0.254 0.051) (seating plane) 0.020 0.002 (0.508 0.051) 0.125 0.015 (3.18 0 .381) c max. a max. b pin #1 identifier 0.100 0.005 (2.54 0.127) non-cumulative
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
